FC-8000 Catalytic Combustion Exhaust Gas Treater and Heat Recovery System
The equipment is mainly used for the organic waste gas such as benzene, toluene, xylene and so on discharged when printing coatings on metal sheets, after flameless catalytic combustion treatment, it becomes non-toxic, harmless clean high-temperature hot air, and is recycled to the heating chamber of the drying room for use as The heat source of the drying room is recycled to achieve the purpose of meeting emission standards and saving energy.
It mainly consists of high-pressure blower, heat exchanger, heater, catalytic bed, catalyst, intake pipe, return air pipe, etc.
Heating energy can be selected from electricity, kerosene, petroleum liquefied gas, natural gas, etc.
The main technical parameters:
| Waste gas treatment capacity | 60(kg/h) |
| Catalytic temperature | 260～550(℃) |
| Use airspeed | 3000～6000(m/h) |
| Catalyst loading | 100×100×40(mm)1176(p) |
| The space velocity through the catalyst bed | 0.4～0.8(m/s) |
| machine weight | 15000(kg) |
| Dimensions (LXWXH) | 8000×3200×5000(mm) |
Leave your contact information:
Write your information here and send it to us.
